Binding, I find it uninspiring

I know I know, some of you reading this will be saying “I love binding” well, I don’t. I don’t find it creative. Actually I believe it is the task of helping the heavy quilted quilt through the machine. That’s what makes me not enjoy binding. Sew, I need to figure out a way I can enjoy binding. After all it is the last step! I find it uninspiring so, lets try to think of a way to make it faster or more creative…

Here is what I find difficult when sewing the binding on the traditional way:

1-dealing with all the bulk through the machine, it is heavy.  Yes, I use my walking foot, also known as an even feed foot.

2-Next is having the quilt in my lap to hand sew the binding to the back of the quilt. Oh my, being that I am in MENOPAUSE! Are you kidding me! I’m an oven right now and to have the quilt on top of me for sewing…just ain’t gonna happen, LOL

3-Arthritis in my hands. Having to hold binding, needle with fingers that ache…not fun

So there are my 3 reasons why I don’t like binding

And, I must add, I do not enter any of my own quilts into quilt shows. If I did, then I would use the traditional method. It is a cleaner look.

You have probably figured out that I machine bind. I truly feel it is stronger than hand binding. You can argue with me if you want, I’m not going to change, see reasons listed above, LOL.

I have 2 methods of machine binding.

1- After squaring the quilt and preparing the binding, I sew the binding to the back of the quilt first. Roll the binding to the front, secure with pins or wonderclips, choose a decorative stitch with a pretty thread and SEW<— that is how I make it creative …pretty thread and a decorative stitch.

2-After squaring the quilt and preparing the binding, I sew the binding to the front of the quilt or top. Next I roll the binding to the back, secure with pins in the ditch from the front of the quilt. I only secure a little bit at a time so I don’t get poked with pins. Use my Digital Dual Walking foot with the ditch foot with guide. Position quilt with the binding ditch area directly in the line of the guide from the foot and sew in the ditch..hoping to catch the back of the binding in place.

I thought I’d show how I mark the binding at the corner. I use my Creative Grid Ruler “Bias Binding Simplified”. If you have this ruler you know that it has a 45° angle on one end. I place the ruler with the angled tip at my corner with the ruler going to my left. I mark the angled line with a chalk pencil. As I continue to sew towards the corner, the needle will land directly on the drawn line. That is where I STOP sewing, needle down, pressure foot lift and turn the quilt so I can sew off at the corner.  I then create the 45° sewn line for re-positioning the binding. Now I can continue onto the next side of the quilt.

My Digital Dual Feed Walking Foot. The Digital Dual Feed Walking Foot is belt driven. Directly behind the foot, is the belt that is 1/2″ wide and grabs the fabric gently advancing. Now top and bottom layers are fed through evenly. Love Love Love this foot.

 This is how I align my ruler. I get perfect mitered corners!

Happy Quilting (Binding) everyone,

Nancy McNally

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *